We currently have vacancies for experienced machine operators at our site in Liverpool
Company Background
Denholm Rees & O’Donnell Ltd is an ISO 9001:2015 SME Subcontract Engineering Company based in Merseyside. Originally established in 1931 to support the local automotive, dock and shipping companies.
We are first-choice suppliers to blue-chip companies across the Oil, Gas, Fluid & Power Generation Sectors. We specialise in the manufacture and supply of precision valve and pump components.
Positions Available – Click a link for more details…
- Precision Pump Shaft Centre Lathe Turner
- CNC Turner / Programmer / Setter /Operator
- CNC – Horizontal Machining Centre (HMC) / Programmer / Setter /Operator
- CNC – Vertical Machining Centre (VMC) / Programmer / Setter /Operator
Precision Pump Shaft Centre Lathe Turner
Salary – £13.11 – £14.00/hr (Subject to skills & experience)
Hours – 39 hrs per week + overtime
Shift – Single Days – Mon – Thurs 7.30 – 16.30 & Fri 7.30 – 12.30.
Location – Liverpool
Essential candidate requirements:
- Must be time served (NVQ 3 or Equivalent)
- Work from detailed engineering drawings
- Understand ISO 9001:2015 Quality Systems
- Previous experience in using steadies and turning precision pump shafts up to 4.0m in length
- Previous experience with machining of exotic metals (super duplex, duplex, 718, x750, Hastelloy, Monel etc)
- Experience in a previous or similar position (2 years minimum)
- Good Planning and Organising skills
- Good communication Skills with both peers and Management
- Attention to detail
Preferred experience but not essential requirements:
- Previous experience in finish turning multi-stage pump shafts
- Other skills within a sub contract machine shop
Apply for this position
CNC Turner / Programmer / Setter /Operator
Salary – £13.00 – £14.00/hr (Subject to skills & experience)
Hours – 39 hrs per week + overtime
Shift – Single Days – Mon – Thurs 7.30 – 16.30 & Fri 7.30 – 12.30.
Location – Liverpool
Essential candidate requirements:
- Must be time served (NVQ 3 or Equivalent)
- Able to fully program, set and operate CNC lathes using Fanuc Controls
- Work from detailed engineering drawings
- Understand ISO 9001:2015 Quality Systems
- Previous experience with machining of exotic metals (super duplex, duplex, 718, x750, Hastelloy, Monel etc)
- Experience in a previous or similar position
- Good Planning and Organising skills
- Good communication Skills with both peers and Management
- Attention to detail
Preferred experience but not essential requirements:
- Doosan Lathes (8” to 30” Chuck sizes) (1 – 3.2m Lengths)
- Manual Guide Programming
- One CNC Programming Software
- C & Y axis programming / machining
- Programmable Steadies
- Valve and pump components
- Oil, Gas, Fluid and Power generation industry sectors
Apply for this position
CNC – Horizontal Machining Centre (HMC) / Programmer / Setter /Operator
Salary – £13.11 – £14.00/hr (Subject to skills & experience)
Hours – 39 hrs per week + overtime
Shift – Single Days – Mon – Thurs 7.30 – 16.30 & Fri 7.30 – 12.30.
Location – Liverpool
Essential candidate requirements:
- Must be time served (NVQ 3 or Equivalent)
- Able to fully program, set and operate Horizontal Machining Centres using Fanuc Controls
- Work from detailed engineering drawings
- Understand ISO 9001:2015 Quality Systems
- Previous experience with machining of exotic metals (super duplex, duplex, 718, x750, Hastelloy, Monel etc)
- Experience in a previous or similar position (2 years minimum)
- Good Planning and Organising skills
- Good communication Skills with both peers and Management
- Attention to detail
Preferred experience but not essential requirements:
- Kafo Horizontal Machining Centres (Twin 630 Pallet)
- Doosan Vertical Machining Centres (750 – 2200mm Beds)
- Manual Guide Programming
- One CNC Programming Software
- 4th axis programming / machining
- Cincinnati Arrow with Heidenhain TNC 426 Control
- Valve and pump components
- Oil, Gas, Fluid and Power generation industry sectors
- Office 365 / ERP Systems
Apply for this position
CNC – Vertical Machining Centre (VMC) / Programmer / Setter /Operator
Salary – £13.11 – £14.00/hr (Subject to skills & experience)
Hours – 39 hrs per week + overtime
Shift – Single Days – Mon – Thurs 7.30 – 16.30 & Fri 7.30 – 12.30.
Location – Liverpool
Essential candidate requirements:
- Must be time served (NVQ 3 or Equivalent)
- Able to fully program, set and operate Vertical Machining Centres using Fanuc Controls
- Work from detailed engineering drawings
- Understand ISO 9001:2015 Quality Systems
- Previous experience with machining of exotic metals (super duplex, duplex, 718, x750, Hastelloy, Monel etc)
- Experience in a previous or similar position (2 years minimum)
- Good Planning and Organising skills
- Good communication Skills with both peers and Management
- Attention to detail
Preferred experience but not essential requirements:
- Doosan Vertical Machining Centres (750 – 2200mm Beds)
- Manual Guide Programming
- One CNC Programming Software
- 4th axis programming / machining
- Cincinnati Arrow with Heidenhain TNC 426 Control
- Valve and pump components
- Oil, Gas, Fluid and Power generation industry sectors
- Office 365 / ERP Systems
Apply for this position
Employee Benefits – All Positions
On joining our team, you will be entitled to highly competitive rates of pay and a range of benefits including:
- Company Bonus Scheme*
- 25 days holiday @ average pay** (+8 days Bank Holiday)
- Contributory pension scheme
- Training and development opportunities
- Corporate Workwear
* At the company’s discretion subject scheme criteria and profitability targets being achieved
**average earnings holiday pay is subject to a 13wk probationary period and based over rolling 13wk period
To apply, please send us your CV:
Please contact:
Ian Johns (Works Director)
Denholm Rees & O’Donnell Ltd
110 – 116 Albany Road
Aintree
Merseyside
L9 0HB
Email – Ianj@denholms.co.uk
You may also apply using our on-line form here: